User Guide

190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
6-7
HAZARD AVOIDANCE
Changing the Stormscope Lightning Mode between ‘cell’ and ‘strike’:
1) Select the Stormscope Page.
2) Press the MODE Softkey. The CELL and STRIKE softkeys are displayed.
3) Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box located in the upper left corner of the Stormscope Page.
OR:
4) Press the MENU Key. The Page Menu is displayed with the inactive mode highlighted (Figure 6-9). Press the
ENT Key to change to the highlighted mode.
Figure 6-9 Stormscope Page Options Menu
Changing the Viewing Mode between 360 ˚ and 120˚:
1) Select the Stormscope Page.
2) Press the MENU Key. The Page Menu is displayed (Figure 6-10).
3) Turn either FMS Knob to select the inactive view. Press the ENT Key.
OR:
4) Press the VIEW Softkey. The 360 and ARC softkeys are displayed (Figure 6-11).
5) Press the 360 Softkey to display a 360˚ viewing area or press the ARC Softkey to display a 120˚ viewing area.
6) Press the BACK Softkey to return to the default Stormscope Page.
Figure 6-10 Selecting 120˚ Arc
Figure 6-11 360, ARC, and BACK Softkeyes
ARC Softkey
360 Softkey
BACK Softkey