User Guide

5-90 190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
GPS NAVIGATION
Selecting a nearest ARTCC and frequency:
1) With the Nearest Frequencies Page displayed, press the FMS Knob to activate the cursor.
2) Turn the small
FMS Knob to select the desired nearest ARTCC.
3) Turn the large
FMS Knob to select the desired ARTCC frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
SOFTKEY OPERATIONS
Selecting a nearest ARTCC and frequency:
1) With the Nearest ARTCC Page displayed, press the ARTCC Softkey to place the cursor in the ‘NEAREST ARTCC’
window.
2) Turn the small
FMS Knob to select the desired nearest ARTCC.
3) Turn the large
FMS Knob to select the desired ARTCC frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
Selecting a nearest FSS and frequency,
1) With the Nearest ARTCC Page displayed, press the FSS Softkey to place the cursor in the ‘NEAREST FSS’
window.
2) Turn the small
FMS Knob to select the desired nearest FSS.
3) Turn the large
FMS Knob to select the desired FSS frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
Selecting a nearest weather frequency:
1) With the Nearest Frequencies Page displayed, press the WX Softkey to highlight the frequency in the ‘WX
FREQUENCY’ field.
2) Turn the FMS Knob to select the desired weather frequency.
3) Press the ENT Key. The selected weather frequency is placed in the COM standby frequency box.
4) Press the FMS Knob to remove the flashing cursor.