User Guide

5-45
GPS NAVIGATION
190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
10) Select the desired runway.
11) With ‘LOAD?’ highlighted, press the ENT Key to load the arrival.
SELECT APPROACH
‘SELECT APPROACH’ selects a published instrument approach for the destination airport or replaces the
current approach with a new selection.
Figure 5-32 Selecting an Approach
Available
Approaches
Available
Transitions
Selecting an approach for a direct-to or flight plan destination airport (Figure 5-32):
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3) Press the ENT Key.
4) Enter an identifier, city, or facility name.
5) Press the ENT Key until the approach field is highlighted.
6) Select the desired approach.
7) Press the ENT Key. A window appears listing the available transitions for the approach.
8) Select the desired transition or vectors.
9) Press the ENT Key.
10) With ‘LOAD?’ highlighted, press the ENT Key to load the approach OR to activate the approach, highlight ‘ACTIVATE?’.
NOTE:
If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’
highlighted. Press the
ENT Key to acknowledge the message. To cancel the approach, select ‘NO’ and press the
ENT Key.