User Guide

5-30
GPS NAVIGATION
190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
Restore Defaults returns the ‘DTK’ and ‘DIS’ fields to ‘DTK’ and ‘DIS’.
Restoring the DTK and DIS fields on the Active Flight Plan Page:
1) With the Active Flight Plan Page displayed, press the MENU Key.
2) Highlight ‘Restore Defaults’.
3) Press the ENT Key.
Removing a waypoint using the CLR Key:
1) With the Active Flight Plan Page displayed, press the small FMS Knob to activate the cursor.
2) Highlight the identifier for the waypoint to delete.
3) Press the CLR Key to display a confirmation window (Figure 5-24).
4) With ‘OK’ highlighted, press ENT to remove the selected waypoint.
Confirmation
Window
Figure 5-24 Removing a Waypoint