User Guide
5-28
GPS NAVIGATION
190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
Figure 5-22 Delete Flight Plan Box
REMOVING AN APPROACH, ARRIVAL, OR DEPARTURE PROCEDURE
• ‘Remove Departure’ deletes the current DP from the active flight plan.
• ‘Remove Arrival’ deletes the current STAR from the active flight plan.
• ‘Remove Approach’ deletes the currently selected approach from the active flight plan.
Removing an approach, arrival, or departure from the active flight plan:
1) From the Active Flight Plan Page, press the
MENU
Key.
2) Select the ‘Remove Approach’, ‘Remove Arrival’ or ‘Remove Departure’ option.
3) Press the
ENT
Key. A confirmation window is displayed listing the procedure.
4) With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal request, highlight ‘CANCEL’ and press the
ENT
Key.
Removing an individual waypoint from the active flight plan:
1) From the Active Flight Plan Page, select the waypoint that is to be deleted.
2) Press the
CLR
Key. A confirmation window is displayed listing the waypoint.
3) With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal request, highlight ‘CANCEL’ and press the
ENT
Key.
ACCESSING THE CLOSEST POINT OF FLIGHT PLAN WINDOW
‘Closest Point of FPL’ calculates the bearing and closest distance at which a flight plan passes from a
reference waypoint. It can also be used to create a new user waypoint along the flight plan at the location
closest to a chosen reference waypoint.
Determining the closest point along the active flight plan to a selected waypoint:
1) From the Active Flight Plan Page, press the
MENU
.
2) Select ‘Closest Point of FPL’.
3) Press the
ENT
Key. A window is displayed with the reference waypoint field highlighted.
4) Enter the identifier of the reference waypoint.
5) Press the
ENT
Key.
6) The G1000 displays the location, lat/lon, bearing (BRG), and distance (DIST) to the closest point along the flight
plan from the selected reference waypoint. To create a user waypoint at this location and add it to the flight plan,
highlight ‘LOAD’ and press the
ENT
Key. The name for the new user waypoint is derived from the identifier of the
reference waypoint.