User Guide

5-25
GPS NAVIGATION
190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
Loading an arrival procedure using the PROC Key:
1) From any page, press the PROC Softkey.
2) Highlight ‘SELECT ARRIVAL’.
3) Press the ENT Key. The ARRIVAL window is displayed on the ‘PROC – ARRIVAL LOADING’ Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With ‘LOAD’ highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
Loading an arrival procedure using the Active Flight Plan Page Menu:
1) From the Active Flight Plan Page, press the MENU Softkey.
2) Highlight ‘Load Arrival’.
3) Press the ENT Key. The ARRIVAL window is displayed on the ‘PROC – ARRIVAL LOADING’ Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With ‘LOAD’ highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.