User Guide

5-9
GPS NAVIGATION
190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
Selecting a direct-to from a list of waypoints in an active flight plan:
1) Press the Direct-to Key.
2) Highlight the FPL field.
3) Turn the small FMS Knob to display a selection window showing all waypoints in the active flight plan.
4) Scroll through the list and highlight the desired waypoint.
5) Press the
ENT Key twice to activate the direct-to.
Selecting a direct-to from the nearest airports list:
1) Press the Direct-to Key.
2) Highlight the NRST field.
3) Turn the small FMS Knob to display a selection window showing the 25 nearest airports.
4) Scroll through the list and highlight the desired airport.
5)
Press the ENT Key twice to activate the direct-to.
Selecting a specific course to a waypoint:
1) Press the Direct-to Key
2) Enter the desired destination waypoint
3) Press the ENT Key.
4) Highlight the ‘CRS’ field.
5) Enter the desired course
6) Press the ENT Key twice to activate the direct-to using the selected course to the destination.
Canceling a direct-to:
1) Press the Direct-to Key
2) Press the MENU Key to display the Direct-to Menu.
3) Press the ENT Key to cancel direct-to navigation. If a flight plan is still active, the G1000 resumes navigating the flight plan
along the closest leg of flight.