User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA42
190-00649-00 Rev. A4-36
AUDIO PANEL AND CNS
NRST – NEAREST FREQUENCIES PAGE
The Nearest Frequencies Page displays a list of nearest ARTCC, FSS, and WX frequencies. For frequency
selection, the cursor can be activated on the ARTCC, FSS, or WX boxes by using the
ARTCC , FSS, and WX
Softkeys.
The Nearest ARTCC and FSS frequency pages contain a numbered list of names as well as bearing and
distance information from the transmitting antenna.
Viewing a nearest ARTCC or FSS frequency and loading it into the standby frequency field:
1) Press the ARTCC or the FSS Softkey to activate the selection cursor in the corresponding box.
2) Turn the small FMS Knob to scroll through the list of names, then the large FMS Knob to highlight the desired
frequency.
3) Press the ENT Key to load the desired frequency into the COM tuning box.
Viewing a nearest WX frequency and loading it into the standby frequency field:
1) Press the WX Softkey to activate the selection cursor in the Nearest WX Box.
2) Turn the FMS Knob to highlight the desired frequency.
3) Press the ENT Key to load the desired frequency into the tuning box.
Figure 4-41 NRST – Nearest Frequencies Page