User Guide

190-00592-01 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
1-41
SYSTEM OVERVIEW
Accessing and navigating checklists:
1) From any page, select the CHKLIST Softkey.
2) Turn the large FMS Knob to select the ‘GROUP’ field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4) Turn the large FMS Knob to select the ‘Checklist’ field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key.
6) Turn the FMS Knob to scroll through the checklist and highlight the desired checklist item (has a hollow white
box for checkmark).
The following colors are used for checklist items:
• Blue - Items has not been highlighted
• White - Item is highlighted for selection
• Green - Item has been selected
• Yellow - Warning notes
7) Press the ENT Key or DONE Softkey to select the highlighted checklist item (item turns green and a checkmark
is placed in the box next to the item). The next item is automatically highlighted for selection.
Press the CLR Key to remove a check mark from an item.
8) Once the last item in a checklist is selected, ‘Go to the next checklist?’ is highlighted. Press the ENT Key to
advance to the next checklist displayed.
9) Press the EXIT Softkey or hold down the CLR Key momentarily to exit the Checklist Page and return to the page
last viewed.
Immediately accessing emergency procedures:
1) From any page, select the CHKLIST Softkey.
2) Press the EMERGCY Softkey.
Figure 1-35 Sample Checklist