User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-01 Rev. A6-30
HAZARD AVOIDANCE
There are two terrain/obstacle viewing options available (relative to the position of the aircraft), the 360°
default display (as shown in Figure 6-40) and the radar-like ARC (120°) display (as shown in Figure 6-41).
Figure 6-40 Terrain Proximity Page
To change the viewing mode between 360° and ARC:
1) Select the Terrain Proximity Page.
2) Press the VIEW Softkey, then press the ARC Softkey or the 360 Softkey.
OR:
3) Press the MENU Key. The page menu is displayed with either ‘View Arc’ or ‘View 360º’. Press the ENT Key to
change the view.
Other aviation information such as airports, VORs, and other NAVAIDS can be displayed on the Terrain
Proximity Page.
Showing or hiding aviation information:
1) Press the MENU Key.
2) Select ‘Show (or Hide) Aviation Data’ and press the ENT Key.
3) Press the CLR Key to toggle aviation information on or off.