User Guide

190-00592-01 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
6-21
HAZARD AVOIDANCE
c) Press the WX Softkey to select the Weather Information Page.
d) Press the FMS Knob momentarily to display the cursor.
e) Use the FMS Knob to enter the desired airport and press the ENT Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. Note that the METAR test must
be completely scrolled through before scrolling through the TAF text.
5) Press the FMS Knob or the CLR Key to return to the Weather Data Link Page, if the airport was selected by
panning from this page.
METAR data is displayed first in a decoded fashion, then as raw text. TAF information is displayed only in
its raw form.
Figure 6-25 METAR and TAF Text Displayed on the Weather Information Page
METAR
Text
TAF
Text
For a METAR legend (as shown in Figure 6-26), press the LEGEND Softkey.
Figure 6-26 METAR Legend
MORE WX
Press the MORE WX Softkey to display these additional softkeys:
SURFACE ANALYSIS AND CITY FORECAST
NOTE: Surface Analysis and City Forecast information display together. They only display within the installed
Aviation Database service area.