User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-01 Rev. A6-2
HAZARD AVOIDANCE
These IDs are located:
• On the label on the back of the unit
• On the XM Information Page on the MFD (as shown in Figure 6-1)
• On the XM Satellite Radio Activation Instructions included with the unit
Contact the installer if the Audio ID and the Radio ID cannot be located.
Activating the XM WX Satellite Weather and XM Satellite Radio Service:
1) Contact XM Satellite Radio through the Internet or by telephone. Follow the directions provided by XM Satellite
Radio.
2) Turn the large FMS Knob to select the Auxiliary Page Group.
3) Turn the small FMS Knob to select to select the fifth page.
4) Press the INFO Softkey to display the XM Information Page.
5) Verify that the desired services are activated and press the DONE Softkey.
6) Turn the large FMS Knob to highlight ‘YES’. To complete activation, press the ENT Key.
Figure 6-1 XM Information Page
Audio
Radio ID (for XM
Satellite Radio)
Weather
Products
(Available
Products for
Service Class
Indicated in
Green)
Data
Radio ID (for XM
Weather)
USING XM WX SATELLITE WEATHER PRODUCTS
The Weather Data Link Page is the primary starting point for viewing weather data because it can display all
available weather products. Other G1000 maps display only a subset of weather products.
The G1000 displays XM WX Satellite Weather data on the MFD and the PFD Inset Map. When a weather
product is active on the Weather Data Link Page or the Navigation Map, the time associated with the data
displays on the right of the screen (as shown in Figures 6-2 and 6-3). The date/time stamp on the G1000
display represents the UTC (Coordinated Universal Time) time when the data was assembled on the ground.
It is not the time the data was received by the Data Link Receiver.