User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-01 Rev. A5-90
GPS NAVIGATION
5.19 PROCEDURES
DEPARTURES, ARRIVALS, AND APPROACHES (MFD)
Options
Figure 5-91 Procedures Window
Approach Procedure
Loaded in Active Flight
Plan
Arrival Loaded in Active
Flight Plan
Departure Procedure
Loaded in Active Flight
Plan
DEPARTURE OPERATIONS
Loading and activating a departure procedure:
1) Press the PROC Key. The Procedures Window is displayed (Figure 5-91).
2) Highlight ‘SELECT DEPARTURE’.
3) Press the E NT Key. The DEPARTURE window is displayed on the ‘PROC – DEPARTURE LOADING Page.
4) Select a departure.
5) Press the E NT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the E NT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the E NT Key.
10) With ‘LOAD’ highlighted, press the ENT Key. The departure procedure is displayed as part of the overall flight
plan and is placed in front of the enroute flight plan.
11) Highlight the desired transition waypoint.
12) Press the E NT Key. ‘LOAD?’ is highlighted.
13) Press the E NT Key. The departure will be active when the flight plan is active.