User Guide

190-00592-01 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
5-47
GPS NAVIGATION
Renaming a user waypoint:
1) Select the User Waypoint Information Page.
2) Press the MENU Key (select ‘Rename User Waypoint’ and press the ENT Key) or press the RENAME Softkey.
3) The user waypoint field is highlighted. Rename the user waypoint.
4) Press the ENT Key.
5) The message ‘Would you like to rename the user waypoint’ is displayed. Select ‘YES’ to rename the new user
waypoint.
Creating user waypoints from the Navigation Map Page:
1) With the Navigation Map Page displayed, push the Joystick to activate the panning function. The map arrow is
displayed at the present aircraft position.
2) After placing the map arrow at the desired position, press the ENT Key.
3) If the Map Pointer is placed on an airspace boundary, the options menu is displayed. Use the FMS Knob to
select ‘Review Airspaces’ or ‘Create User Waypoint’ and press the
ENT Key.
Create User
Waypoint Option
Figure 5-41 User Waypoints on Navigation Map
Map Pointer
Information
4) If ‘Review Airspaces is selected, the Review Airspace Information Box is displayed (Figure 5-43).