User Guide

190-00592-01 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
5-45
GPS NAVIGATION
Modifying a user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the desired field.
3) Turn the small FMS Knob to make changes.
4) Press the E NT Key to accept the changes.
5) Press the FMS Knob to remove the flashing cursor.
Deleting a user waypoint:
1) Select the User Waypoint Information Page.
2) Press the MENU Key to display the User Waypoint Information Page options or press the DELETE Softkey.
3) Select ‘Delete User Waypoint’.
4) Press t he E NT Key. The message ‘Would you like to delete the user waypoint’ is displayed.
5) With ‘YES’ highlighted, press the ENT Key.
Deleting all user waypoints:
1) Select the User Waypoint Information Page.
2) Press the MENU Key.
3) Select ‘Delete All User Waypoints’.
4) Press the ENT Key. A confirmation windows is displayed.
5) Press the ENT Key to accept ‘YES’ or highlight ‘NO’.
6) Press the ENT Key.
‘View Recent User WPT List’ displays the most recent user waypoint list.
Viewing the most recent user waypoint list:
1) Select the User Waypoint Information Page.
2) Press the MENU Key to display the User Waypoint Information Page MENU.
3) Select ‘View Recent User WPT List’.
4) Press the ENT Key. Select a waypoint from the list (16 maximum are listed).
5) Press the ENT Key. The selected waypoint is now the active user waypoint.