User Guide

190-00592-01 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
4-31
AUDIO PANEL AND CNS
FLIGHT ID REPORTING
NOTE: If the FLT ID is required but the system is not configured for it, contact a Garmin authorized service
center for configuration.
When the flight crew must enter the Flight ID before flight operation, the number is entered in the Timer/
References Window. The flight ID is not to exceed seven characters. No space is needed when entering Flight
ID. When a Flight ID contains a space, the system automatically removes it upon completion of Flight ID
entry.
Entering a flight ID:
1) Press the TMR/REF Softkey to display the Timer/References Window.
2) Press the FMS Knob to activate the selection cursor.
3) Turn the FMS Knob to enter the desired FLT ID.
4) Press the ENT Key to complete FLT ID entry.
If an error is made during FLT ID entry, pressing the
CLR Key moves the cursor back one space for each press
of the key. If an incorrect FLT ID is discovered after the unit begins operation, reenter the correct FLT ID using
the same procedure.
Figure 4-43 Timer/References Window, Entering FLT ID
Flight ID
PFD Entry