User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-02 Rev. A5-108
GPS NAVIGATION
SELECT APPROACH
‘SELECT APPROACH’ selects a published instrument approach for the destination airport or replaces the
current approach with a new selection.
Figure 5-100 Selecting an Approach
Available
Approaches
Available
Transitions
Selecting an approach for a direct-to or flight plan destination airport (Figure 5-100):
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3) Press the E NT Key.
4) Enter an identifier, city, or facility name.
5) Press the E NT Key until the approach field is highlighted.
6) Select the desired approach.
7) Press the E NT Key. A window appears listing the available transitions for the approach.
8) Select the desired transition or vectors.
9) Press the E NT Key.
10) With ‘LOAD?’ highlighted, press the ENT Key to load the approach OR: to activate the approach, highlight ‘ACTIVATE?’.
NOTE:
If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’
highlighted. Press the E NT Key to acknowledge the message. To cancel the approach, select ‘NO’ and press
the ENT Key.