User Guide

190-00592-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
5-51
GPS NAVIGATION
Figure 5-42 Naming a User Waypoint
User Waypoint
Name
4) If ‘Create User Waypoint’ is selected, the User Waypoint Information Page is displayed with the captured
position.
Figure 5-43 Airspace Information Box
Airspace
Information
5) Enter a waypoint name.
6) Press the E NT Key to accept the selected name. The first reference waypoint field is highlighted.
7) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
8) Press the E NT Key to accept.
9) Press the FMS Knob to remove the flashing cursor.