User Guide

190-00592-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
5-39
GPS NAVIGATION
Selecting a runway:
1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor.
2) Place the cursor on the ‘RUNWAYS’ identifier field.
3) Turn the small FMS Knob to display the next runway for the selected airport. Continue turning the small FMS
Knob to select the desired runway.
4) To remove the flashing cursor, press the FMS Knob .
Viewing a recent airport list:
1) Select any Airport Information Page.
2) Press the M ENU Key.
3) Highlight ‘View Recent Airport’.
4) Press the E NT Key. A list containing the most recent 16 airports is displayed.
5) Select an airport.
6) Press the E NT Key. The Airport Information page for the selected airport is displayed.
Viewing information:
1) Select the Departure, Arrival, or Approach Information Window.
2) Press the M ENU Key.
3) Highlight ‘View Info’.
4) Press the E NT Key. The Airport Information Window is displayed.
Creating user waypoints via the Airport Information Page Map:
1) With the Airport Information Page displayed, push the Joystick to activate the panning function. The target
pointer is displayed at the center of the map.
2) After placing the pointer at the desired position, press the ENT Key. The User Waypoint Information Page is now
displayed with the captured position.
3) Enter a waypoint name.
4) Press the E NT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the E NT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.