User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-02 Rev. A5-34
GPS NAVIGATION
Selecting a Direct-to destination to a flight plan waypoint:
1) While navigating an active flight plan, press the Direct-to Key.
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-28.
Figure 5-28 Flight Plan Waypoint List
3) Select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.
Selecting a Direct-to destination to a nearest airport:
1) Press the Direct-to Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-29. The list
is only populated when navigating a flight plan.
Figure 5-29 Nearest Airport List
3) Select the desired airport.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.
Cancelling Direct-to navigation:
1) Press the Direct-to Key.
2) Press the MENU Key to display the Options Window. The cursor will be flashing on ‘Cancel Direct-to NAV’.
3) Press the ENT Key to cancel the Direct-to.