User Guide

190-00592-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
5-31
GPS NAVIGATION
Manually defining the active Direct-to:
1) Press the Direct-to Key.
2) Place the cursor in the ‘COURSE’ field.
3) Enter the desired course.
4) Press the ENT Key. The cursor now highlights ‘ACTIVATE?’.
5) Press the ENT Key again to begin navigation using the selected destination, altitude constraint, and course.
Canceling Direct-to navigation:
1) Press the Direct-to Key.
2) Press the MENU Key to display the Direct-to options menu (Figure 5-25).
3) With ‘Cancel Direct-To NAV’ highlighted, press the ENT Key. If a flight plan is still active, the G1000 resumes
navigating the flight plan along the closest leg.
Cancel Option
Figure 5-25 Canceling Direct-to Option