User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
190-00592-02 Rev. A5-30
GPS NAVIGATION
Selecting a Direct-to destination to a nearest airport:
1) Press the Direct-to Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-24. The list
is populated only when navigating a flight plan.
Figure 5-24 Nearest Airport List
3) Turn the small FMS Knob to the right to display the ‘NRST’ airports to the aircraft’s current position as shown in
Figure 5-24.
4) Select the desired airport.
5) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
6) Press ENT again to activate a Direct-to.
Re-centering the CDI to the destination waypoint:
Press the Direct-to Key, followed by pressing the ENT Key twice. If a missed approach point (MAP) is the
current destination, the approach will be canceled.
NRST Waypoints