User Guide

Garmin G1000 Cockpit Reference Guide for the DA40
5-4
SECTION 5 – AUDIO PANEL
5.6 DIGITAL CLEARANCE RECORDER
AND PLAYER
Each reception of primary active COM audio is
automatically recorded in a memory block. When the next
transmission is received, it is recorded in the next memory
block, and so on. Once the 2.5 minutes of recording time
has been reached, the recorder begins recording over the
stored memory blocks, starting from the oldest block.
Powering off the unit automatically clears all recorded
blocks.
Figure 5-8 Playback
• Pressing PLAY once plays the latest recorded
memory block, then returns to normal operation.
• Pressing PLAY again while playing a memory block
halts playing of this block and plays the preceding
recorded block. The PLAY Key can be used to move
back through the recorded memory blocks to reach
and play any desired block.
• Pressing the MKR/MUTE Key during play halts
playing and returns the recorder/playback to normal
operation.
If a COM input signal is detected during while playing,
play is halted and the new COM input signal is recorded
as the latest block.