User Guide

Garmin G1000 Cockpit Reference Guide for the DA40
1-6
SECTION 1
SYSTEM OVERVIEW
ADF – Displays ADF waypoint frequency in the
BRG2 Information Window.
OFF – Removes the BRG2 Information
Window.
STD BARO – Press to set the barometric pressure to
29.92 inches of mercury (1013 hPa by pressing
the METRIC Softkey).
BACK – Press to return to the previous level
softkeys.
ALERTS – Press to display the Alerts Window.
Press the BACK Softkey
to return to the top level
softkeys
Press the BACK
Softkey to retur
n
to the top level
softkeys
Figure 1-5 PFD Softkey Flow Chart – 3
OBS – Press to select OBS mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Press to change navigation mode on the CDI
between GPS, VOR1, and VOR2.
ADF/DME (optional) – Press to display the ADF/DME
Tuning Window.
XPDR – Press to display the transponder mode
selection softkeys.
STBY – Press to select standby mode.
ON – Press to select mode A.
ALT – Press to select altitude reporting mode.
VFR – Press to automatically squawk 1200 (only
in the U.S.A., refer to ICAO standards for VFR
codes in other countries).
CODE – Press to display transponder code selection
softkeys 0-7.
0 through 7 – Press numbers to enter code.
IDENT – Press to provide special aircraft
position identification to Air Traffic Control
(ATC).
BKSP – Press to remove numbers entered one
at a time.
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).