User Guide

Garmin G1000 Pilot’s Guide for the Columbia 350/400
190-00552-00 Rev. A4-16
AUDIO PANEL AND CNS
TUNING BOX
A light blue tuning box is displayed around the standby frequency fields on both the PFD and MFD. Pressing
the small
COM or NAV Knob transfers the tuning box back and forth between the two standby frequency
fields.
Frequencies in the standby field are displayed in either white or gray. The standby frequency in the tuning
box is white. The other standby frequency is gray.
Frequency Transfer Arrow
Tuning Box
Figure 4-14 Frequency Transfer Arrow and Tuning Box
FREQUENCY TRANSFER ARROW
NOTE: When a COM signal is received or transmitted, the Frequency Transfer Arrow is replaced by a white
RX or TX indication.
The Frequency Transfer Arrow is displayed between the COM and NAV active and standby frequencies for the
active radio. Pressing the Frequency Transfer Key transfers the frequencies. Pressing the small COM or NAV
Knob transfers the frequency tuning box and the Frequency Transfer Arrow between the radios.
Figure 4-15 Transferring NAV and COM Frequencies
Pressing the COM Frequency
Transfer
Key Transfers the COM
Frequencies.
Pressing the NAV Frequency
Transfer
Key Transfers the NAV
Frequencies.