User Guide

Garmin G1000 Pilot’s Guide for the Columbia 350/400
190-00552-00 Rev. A2-16
FLIGHT INSTRUMENTS
When a bearing pointer is displayed, its associated information window is also displayed. The Bearing
Information Windows are displayed to the lower sides of the HSI and show:
• Bearing source (NAV, GPS)
• Pointer icon (single line for BRG1, double line for BRG2)
• Frequency (NAV,)
• Station/waypoint identifier (NAV, GPS)
• GPS-derived great circle distance to bearing source
If the NAV radio is the selected bearing source and is tuned to an ILS frequency, the bearing pointer is
removed from the HSI and the frequency is replaced with “ILS”. If the NAV radio is not receiving the tuned
VOR station, the bearing pointer is removed from the HSI and the frequency displayed in the information
window is replaced with “NO DATA”. When NAV1 or NAV2 is the selected bearing source, the frequency is
replaced by the station identifier when the station is within range.
If GPS is the selected bearing source, the active waypoint identifier is displayed in lieu of a frequency. If an
active waypoint is not selected, the bearing pointer is removed from the HSI and “NO DATA” is displayed in
the information window.
Selecting bearing display and changing sources:
1) Select the PFD Softkey.
2) Select a BRG Softkey to display the desired bearing pointer and information window with a NAV source.
3) Select the BRG Softkey again to change the bearing source to GPS.
4) To remove the bearing pointer and information window, press the BRG Softkey again.