User Guide

Garmin G1000 Pilot’s Guide for the Columbia 350/400
190-00552-00 Rev. A6-38
HAZARD AVOIDANCE
TERRAIN DATA ON THE NAVIGATION MAP PAGE
Terrain and obstacle data is displayed on the Navigation Map Page (Figure 6-42). Obstacles are shown on the
Navigation Map Page at or below the map range of 20 nm.
Displaying Terrain Data on the Navigation Map Page:
1) Select the MAP Softkey.
2) Select the TERRAIN Softkey to display the terrain and obstacle data on the Navigation Map Page. Select the
TERRAIN Softkey again to remove the terrain and obstacle data from the Navigation Map Page.
Red Lighted
Obstacle (Above or
Within 100’ Below
Aircraft Altitude)
Aircraft Symbol
Figure 6-42 Terrain on the Navigation Map Page (TIS)
Cursor Placed on
Lighted Obstacle Gives
Height in MSL & AGL
Terrain Legend
Red Terrain Area
(Above or Within
100’ Below
Aircraft Altitude)
Yellow Terrain Area
(Between 100’ and 1000’
Below Aircraft Altitude)
MAP Softkey
Terrain Symbol & Range
Data for
Selected
Lighted
Obstacle
Terrain can be selected on the PFD inset map (Figure 6-43) by selecting the TERRAIN Softkey. Terrain
display may also be deselected from the inset map without affecting the terrain display on the MFD maps.
Figure 6-43 Terrain on PFD Inset Map
Range
Terrain
Symbol
Lighted
Obstacle
Obstacles are shown on the Terrain Page at or below the map range of 10 nm.