User Guide
190-00552-00 Rev. A
Garmin G1000 Pilot’s Guide for the Columbia 350/400
1-20
SYSTEM OVERVIEW
MFD SOFTKEYS
MFD softkeys vary depending on the page selected. EIS and Navigation Map Page (default MFD page)
softkeys are described here.
• SYSTEM
Displays EIS Page and second-level engine softkeys; press again to exit EIS Page (see the EIS
Section for more information)
OXYGEN
Turns oxygen system ON/OFF
DCLTR
Turns off CHT and EGT cylinder readouts
ASSIST
Accesses engine leaning assist mode
CO RST
Resets the CO Guardian and acknowledges CO warning alert
DEC FUEL
Decreases displayed fuel remaining in 1-gal increments
INC FUEL
Increases displayed fuel remaining in 1-gal increments
RST FUEL
Resets displayed fuel remaining to 98 gallons and fuel used to zero
• MAP
Enables second-level Navigation Map Page softkeys
TRAFFIC
Displays/removes traffic information on Navigation Map Page
TOPO
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Navigation
Map Page
TERRAIN
Displays/removes terrain information on Navigation Map Page
STRMSCP
Displays/removes Stormscope weather information on Navigation Map Page (Columbia 350
only, optional
)
NEXRAD
Displays/removes NEXRAD weather/coverage on Navigation Map Page (
optional)
XM LTNG
Displays/removes XM lightning information on Navigation Map Page (
optional)
BACK
Returns to top-level softkeys
• DCLTR (3)
Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except the active flight plan
• CHKLIST Displays the Checklist Page; press the EXIT Softkey to return to the top-level softkeys
Figure 1-19 MFD Softkeys (EIS and Navigation Map)