User Guide

Garmin G1000 Pilot’s Guide for the Columbia 350/400
190-00552-00 Rev. A6-34
HAZARD AVOIDANCE
The Altitude Display Mode can be changed to show traffic in the selected range; the following softkeys
appear after selecting the ALT MODE Softkey:
BELOW
NORMAL
ABOVE
UNREST
With each selection, the screen changes to display the traffic detected within the selected altitude display
range. The G1000 screen also displays unrestricted traffic (UNREST) having a range of maximum specified
by the 9900 BX Pilot’s Guide. Refer to the 9900 BX Pilot’s Guide for information regarding altitude display
ranges. Note that confirmation is not required. The mode is changed immediately when selected.
The display range on the Traffic Map Page can be changed at any time.
To change the display range on the Traffic Page, turn the
RNG Knob to zoom through the following range
options:
2 nm, 2 and 6 nm, 6 and 12 nm, 12 and 24 nm, and 24 and 40 nm.
Figure 6-39 Traffic Map Page (TAS), Altitude Selection
BELOW, NORMAL,
ABOVE , and
UNREST Softkeys
Proximity Traffic at
Same Altitude &
Climbing
Operating Mode
and Altitude Display
Mode Indicator