User Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
1-6
SECTION 1
SYSTEM OVERVIEW
NRST
OBS
CDI
TMR/REF
IDENT
ALERTS
XPDR
STBY
ON
BACK
VFR
ALT
CODE
IDENT
0
1
6
3
2
4
5
7
IDENT
BACK
BKSP
Press the BACK softkey
to return to the top leve
l
softkey
s
Press the BACK
softke
y
to return to
the top level
softkeys
ALERTS
ALERTS
GPS
VOR1
DME
(optional)
VOR2
Figure 1-5 PFD Softkey Flow Chart – 3
IDENT – Press to provide special aircraft
position identification to Air Traffic Control
(ATC).
BKSP – Press to remove numbers entered one
at a time.
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
window.
NRST – Press to display the Nearest Airports
window.
ALERTS – Press to display the Alerts window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the
LEAN and SYSTEM softkeys which in turn access
the Lean Page and the System Page, respectively.
MAP – pressing this softkey enables the following
softkeys:
TRAFFIC – pressing this softkey displays/removes
Traffic on the Navigation Map.
TOPO – pressing this softkey displays or removes
topographic information on the Navigation Map.
TERRAIN – pressing this softkey displays/removes
terrain and obstacle data on the Navigation Map.