User Guide

Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
190-00494-00 Rev. B
2-18
FLIGHT INSTRUMENTS
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press a CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
Figure 2-28 Omni-bearing Selector (OBS) Mode
Pressing the OBS Softkey Again
Returns to Normal Operation
Pressing the OBS Softkey
Enables OBS Mode
GPS
Selected
Extended
Course Line
OBS Mode
Enabled
OBS Course
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. ‘SUSP’ appears on the HSI (to the lower right of the aircraft symbol) in place of ‘OBS’ and the
OBS Softkey label changes to SUSP.
SUSP
Annunciation
Figure 2-29 Suspending Automatic Waypoint Sequencing
Pressing the SUSP Softkey Suspends
Automatic Waypoint Sequencing