User Guide

190-00494-00 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 1-36
SYSTEM OVERVIEW
Setting the system time format
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time format field in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
ENT Key.
Setting the current time offset
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box.
3) Enter the time offset and press the ENT Key.
DISPLAY UNITS
The Display Units Box on the System Setup Page shows the configured units of measure used for each
category and the system parameters they affect. The NAV ANGLE is pilot selectable. The units of measure
for the other categories are preset at the factory. To change units of measure in any of these categories,
contact a Garmin authorized service center.
• Nav angle (magnetic, true)
When set to ‘MAGNETIC’, magnetic variation is figured into the displayed value. When ‘TRUE’ is
selected, no magnetic variation is calculated and a ‘T’ is displayed next to the value.
Affects the BRG field in the PFD Navigation Status Box.
Affects Current Heading, Selected Heading, and Selected Course boxes on the PFD.
Affects the BRG, DTK, TKE, TRK, and XTK fields in the MFD Navigation Status Box.
• Distance and speed (metric, nautical)
Affects the DIS field in the PFD Navigation Status Box and the range setting of the Inset Map.
Affects all distance and speed displays on the MFD with the exception of the displayed wind speed
displayed on the Navigation Map Page. Wind speed is affected on the Trip Planning Page.
• Altitude and vertical speed (feet, meters)
Affects all altitude and elevation displays on the MFD, with the exception of VNV altitudes on the
Active Flight Plan Page.
• Barometric pressure (inches of mercury, hectopascals)
Affects the altimeter setting on the PFD and the pressure display on the Trip Planning Page.
• Temperature (Celsius, Fahrenheit)
Affects all temperature displays on the PFD.
Affects the temperature display on the Trip Planning Page. Does not affect the EICAS displays.
• Fuel and fuel flow (pounds, kilograms)
Affects fuel and fuel flow displayed on the Trip Planning Page.