User Guide

Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-00 Rev. B8-32
ADDITIONAL FEATURES
Selecting a chart:
1) While viewing the Navigation Map Page, press the SHW CHRT Softkey. The airport diagram will be displayed
on the Airport Information Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box.
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small FMS Knob to show the approach chart selection choices.
8) Turn either FMS Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
Figure 8-40 Approach Information Page, Chart Selection
Select Desired
Approach Chart
from Menu
Chart Not
To Scale
Zoom In or
Out With
the Joystick
Scroll Through
Entire Chart With
the Joystick
Aircraft Not
Shown Icon
While the APPROACH Box is selected using the FMS Knob, the G1000 softkeys are blank. Once the desired
chart is selected, the chart zoom range can be changed and the chart page can be scrolled using the Joystick.
Pressing the Joystick centers the chart on the screen.
The aircraft symbol is not shown on FliteCharts. The Chart Scale Box displays a banner ‘CHART NOT TO
SCALE’, and the Aircraft Not Shown Icon is displayed in the lower right corner of the screen.