User Guide

190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
7-43
AFCS
Flying a WAAS precision approach:
1) Arm flight director modes for a precision approach:
a) Make sure the navigation source is set to GPS (use CDI Softkey to change navigation source).
b) Load the Runway 35R LPV approach for KCOS into the flight plan.
2) Press the APR Key once clearance for approach has been acquired. GPS Approach Mode is activated (provided
the crosstrack error is less than 2 nm) and Glidepath Mode is armed.
3) Once the glidepath is captured, Glidepath Mode becomes active.
4) There are two options available at this point, as the autopilot flies the approach:
• Push the AP DISC Switch at the Decision
height and land the aircraft.
• Use the GA Switch to execute a missed
approach.
4
GPS APR/
G
P
M
ode
FALUR
1
2
3
GPS NA
V Mode
KCOS
HABUK
PYNON
CEGIX
Figure 7-43 LPV Approach to KCOS