User Guide

Garmin G1000 Pilot’s Guide for Cessna Citation Mustang
190-00494-00 Rev. B6-70
HAZARD AVOIDANCE
Customizing traffic display on the Navigation Map Page:
1) On the Navigation Map Page, press the MENU Key.
2) While the ‘Map Setup’ selection is highlighted on the Page Menu, press the ENT Key.
3) Turn the small FMS Knob to select the ‘Traffic’ group and press the ENT Key.
4) Turn the large FMS Knob to highlight and move between the product selections (Figure 6-72):
• TRAFFIC – Turns the display of traffic data on or off
• TRAFFIC MODE – Selects the traffic mode for display on the Navigation Map. Select from:
- All Traffic - Displays all traffic
- TA/PA - Displays Traffic Alerts and Proximity Advisories
- TA ONLY - Displays Traffic Alerts only
• TRAFFIC SMBL – Selects the maximum range at which traffic symbols are shown on the Navigation Map
(from 500 ft to 300 nm)
• TRAFFIC LBL – Selects the maximum range at which traffic labels display (from 500 ft to 300 nm, with the
option to turn off)
5) When an item is highlighted, turn the small FMS Knob to select the option.
6) Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page.
Figure 6-72 Map Setup Menu
Figure 6-71 Page Menu