User Guide

190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
1-21
SYSTEM OVERVIEW
SENSOR
Displays softkeys for selecting the #1 and #2 AHRS and Air Data
Computers
ADC1
Selects the #1 Air Data Computer
ADC2
Selects the #2 Air Data Computer
AHRS1
Selects the #1 AHRS
AHRS2
Selects the #2 AHRS
PFD
Displays second-level softkeys for additional PFD configurations
FD FRMT
Displays the softkeys for selecting the two flight director formats
SNGL CUE
Selects the single cue flight director format
X POINTR
Selects the cross pointer flight director format
DFLTS
Resets PFD to default settings, including changing units to standard
WIND
Displays softkeys to select wind data parameters
OPTN 1
Longitudinal and lateral components
OPTN 2
Total direction and speed
OPTN 3
Total direction with head and crosswind speed components
OFF
Information not displayed
BRG1
Cycles the Bearing 1 Information Window through NAV1, GPS/
waypoint identifier and GPS-derived distance information, and ADF/
frequency.
BRG2
Cycles the Bearing 2 Information Window through NAV2 or GPS
waypoint identifier and GPS-derived distance information, and ADF/
frequency.
ALT UNIT
Displays softkeys for setting the altimeter and BARO settings to metric
units
METERS
When enabled, displays altimeter in meters
IN
Press to display the BARO setting as inches of mercury
HPA
Press to display the BARO setting as hectopacals
STD
BARO
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units
are selected)
OBS
Selects OBS mode on the CDI when navigating by GPS (only
available with active leg)
CDI
Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI
ADF/DME
Displays the ADF/DME Tuning Window, allowing tuning of the ADF,
ADF Mode selection, ADF volume control, and selection of the DME
XPDR
Displays transponder mode selection softkeys
XPDR1
Selects the #1 transponder as active
XPDR2
Selects the #2 transponder as active
STBY
Selects standby mode (transponder does not reply to any
interrogations)