User Guide

GPS NAVIGATION
5-149190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
Selecting an arrival for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT ARRIVAL’.
3) Select the ENT Key.
4) Enter an identifier, city, or facility name.
5) Select the ENT Key until the arrival field is highlighted.
6) Select the desired arrival.
7) Select the ENT Key. A window appears listing the available transitions for the arrival.
8) Select the desired transition or vectors.
9) Select the ENT Key. A window appears listing the available runways for the arrival.
10) Select the desired runway.
11) With ‘LOAD?’ highlighted, select the ENT Key to load the arrival.
SELECT APPROACH
‘SELECT APPROACH’ selects a published instrument approach for the destination airport or replaces the
current approach with a new selection.
Figure 5-142 Selecting an Approach
Available
Approaches
Available
Transitions
Selecting an approach for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3) Select the ENT Key.
4) Enter an identifier, city, or facility name.
5) Select the ENT Key until the approach field is highlighted.
6) Select the desired approach.
7) Select the ENT Key. A window appears listing the available transitions for the approach.
8) Select the desired transition or vectors.
9) Select the ENT Key.