User Guide

GPS NAVIGATION
5-144 190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
8) Highlight ‘LOAD?’ or ‘ACTIVATE?’. ‘LOAD’ adds the approach to the flight plan without immediately using the
approach for navigation guidance. This allows for the original flight plan to continue navigating until cleared
for the approach, but keeps the approach available for quick activation when needed. ‘ACTIVATE’ adds the
approach to the flight plan and begins navigating the approach course.
9) If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’ highlighted.
Select the ENT Key to acknowledge the message. To cancel the approach, select ‘NO’ and select the ENT Key.
OR:
1) From the Approach Loading Page Window, highlight the ‘CHANNEL’ field (Figure 5-137).
Figure 5-137 WAAS Channel Selection
WAAS Channel Field
2) Enter the desired channel number.
3) Select the ENT Key. The TRANSITION window is displayed.
4) Select a transition (the ‘VECTORS’ option assumes vectors will be received to the final course segment of the
approach and will provide navigation guidance relative to the final approach course).
5) Select the ENT Key.
6) Highlight ‘LOAD?’ or ‘ACTIVATE?’. ‘LOAD’ adds the approach to the flight plan without immediately using the
approach for navigation guidance. This allows for the original flight plan to continue navigating until cleared for
the approach, but keeps the approach available for quick activation when needed. ‘Activate’ adds the approach
to the flight plan and begins navigating the approach course.