User Guide
GPS NAVIGATION
5-87190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
After navigating along a flight plan, the route can be reversed for navigation guidance back to the original
departure waypoint.
Inverting and Activating a stored flight plan:
1) Highlight desired flight plan.
2) Press the INVERT Softkey from the Flight Plan Catalog Page. The ‘Invert and activate stored flight plan?’
Window is displayed.
3) With ‘OK’ highlighted, press the ENT Key. To cancel the operation, highlight ‘CANCEL’ and press the ENT Key.
OR:
1) Select the FPL Key.
2) Turn the small FMS Knob to display the Flight Plan Catalog Page.
3) Press the FMS Knob to activate the cursor.
4) Highlight the desired flight plan.
5) Select the MENU Key.
6) Highlight ‘Invert & Activate FPL’.
7) Select the ENT Key. The ‘Invert and activate stored flight plan?’ Window is displayed.
8) With ‘OK’ highlighted, select the ENT Key. To cancel the operation, highlight ‘CANCEL’ and select the ENT
Key.
‘Closest Point of FPL’ calculates the bearing and closest distance at which a flight plan passes from a reference
waypoint. It can also be used to create a new user waypoint along the flight plan at the location closest to a
chosen reference waypoint.
Determining the closest point along the active flight plan to a selected waypoint:
1) From the Active Flight Plan Window, select the MENU.
2) Select ‘Closest Point of FPL’.
3) Select the ENT Key. A window is displayed with the reference waypoint field highlighted.
4) Enter the identifier of the reference waypoint.
5) Select the ENT Key.
6) The G1000 displays the location, lat/lon, bearing (BRG), and distance (DIST) to the closest point along the
flight plan from the selected reference waypoint. To create a user waypoint at this location and add it to the
flight plan, highlight ‘LOAD’ and select the
ENT Key. The name for the new user waypoint is derived from the
identifier of the reference waypoint.
Copying a stored flight plan into another storage slot:
1) From the Flight Plan Catalog Window, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Select the MENU Key.