User Guide

GPS NAVIGATION
5-83190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
Adding a waypoint to a stored flight plan:
1) From the Flight Plan Catalog Window, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the EDIT Softkey.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Select the ENT Key. The new waypoint now exists in the flight plan.
OR:
1) From the Flight Plan Catalog Window, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Select the ENT Key.
4) To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5) Enter the identifier, facility, or city of the new waypoint.
6) Select the ENT Key. The new waypoint now exists in the flight plan.
Removing individual waypoints from the flight plan, except waypoints in the final approach
segment:
1) From the Active Flight Plan Window, select the waypoint that is to be deleted.
2) Select the CLR Key. A confirmation window is displayed listing the waypoint.
3) With ‘OK’ highlighted, select the ENT Key. To cancel the removal request, highlight ‘CANCEL’ and select the
ENT Key.