User Guide

GPS NAVIGATION
5-52 190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
Loading a frequency in the standby COM or NAV window:
1) With the Airport Information Page displayed, press the FMS Kno b to activate the cursor.
2) Move the cursor to the Frequencies Box.
3) Turn the FMS Knob to scroll through the list, placing the cursor on the desired frequency. If a listed frequency
has additional information for the pilot to view, the frequency is preceded by an info (‘i’) designation. Select the
ENT Key to view the information. The following may be displayed with the frequency:
• ‘TX’ – transmit only
• ‘RX’ – receive only
• ‘PT’ – part time frequency
• ‘i’ – additional information exists, select the ENT Key
4) Select the ENT Key to place the selected frequency in the standby field of the COM or NAV window.
5) Press the FMS Knob to remove the cursor.
The Airport Frequencies field uses the descriptions and abbreviations listed in Table 5-2:
Communication
Frequencies Which
May Include Additional
Information
Communication Frequencies
Without Additional
Information
Navigation
Frequencies
Approach
Arrival
Class B
Class C
CTA
Departure
TMA
Terminal
TRSA
ATIS
ASOS
AWOS
Center
Clearance
Gate
Control
Ground
Helicopter
Multicom
Pre-Taxi
Radar
Ramp
Other
Tower
Unicom
ILS
LOC
Table 5-2 Frequency Descriptions and Abbreviations