User Guide

190-00494-00 Rev. B
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
4-5
AUDIO PANEL AND CNS
6
COM3 – Not used in the Cessna Citation Mustang.
7
PA – Selects the passenger address system. The selected COM transmitter is deselected when the PA Key
is pressed.
8
TEL – Not used in the Cessna Citation Mustang.
9
MUSIC – Not used in the Cessna Citation Mustang.
10
SPKR – Selects and deselects the flight deck speaker. COM and NAV receiver audio will be heard on the
speaker.
11
MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver
audio. Un-mutes automatically when new marker beacon audio is received.
12
HI SENS – Press to increase marker beacon receiver sensitivity. Press again to return to low sensitivity.
13
DME – Turns DME audio on or off.
14
NAV1 – When selected, audio from the #1 NAV receiver can be heard.
15
ADF – Turns the optional ADF receiver audio on or off.
16
NAV2 – When selected, audio from the #2 NAV receiver can be heard.
17
AUX – Not used in the Cessna Citation Mustang.
18
REC – Press to enable the recording of up to 2.5 minutes of COM receiver audio. When no audio is being
received, nothing is recorded. Press again to stop recording.
19
PLAY – Press once to play the last recorded COM audio. Press again to stop playing. Press twice within 0.5
second while audio is playing and the previous block of recorded audio will be played. Each subsequent
two presses within 0.5 second plays each previously recorded block.
20
INTR COM – Selects and deselects the pilot/copilot intercom on both Audio Panels.
21
MAN SQ – Enables manual squelch for the intercom. When active, press the ICS Knob to illuminate ‘SQ’.
Turn the ICS Knob to adjust squelch.
22
ICS Knob – Turn to adjust intercom volume or squelch. Press to switch between volume and squelch
control as indicated by the ‘VOL’ or ‘SQ’ being illuminated. The MAN SQ Key must be selected to allow
squelch adjustment.
23
MSTR Knob – The Master Volume Control adjusts volume for the blended NAV, COM, and intercom audio
and alert warnings.
24
Reversionary Mode Button – Manually selects Reversionary Mode.