User Guide

190-00600-00 Rev. B
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
32
Hazard Avoidance
4) Select the STANDBY Softkey to place the system in the Standby Mode. ‘TIS
STANDBY’ will be displayed in the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map displayed, press the MAP
Softkey.
2) Select the TRAFFIC Softkey. Traffic will now be displayed on the map.
TERRAIN AWARENESS & WARNING SYSTEM (TAWS) DISPLAY
NOTE: Terrain data is not displayed when the aircraft latitude is greater than
75 degrees north or 60 degrees south.
NOTE: TAWS operation is only available when the G1000 is configured for a
TAWS-B installation.
Manual System Test
1) While the TAWS Page is displayed, press the MENU Key.
2) Turn the small FMS Knob to select ‘Test TAWS’.
3) Press the ENT Key. During the test ‘TAWS TEST’ is displayed in the center of
the TAWS Page.
When all is in working order, “TAWS System Test, OK” will be heard.