User Guide

190-00600-00 Rev. B
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
26
Procedures
4) Turn the large FMS Knob to highlight the desired arrival.
5) Press the ENT Key. A list of transitions is displayed for the selected arrival.
6) Turn either FMS Knob to select the desired transition.
7) Press the ENT Key. A list of runways is displayed for the selected arrival.
8) Turn the large FMS Knob to highlight the desired runway.
9) Press the ENT Key.
10) With ‘LOAD?’ highlighted, press the ENT Key.
11) The arrival will become part of the active flight plan.
ACTIVATE AN ARRIVAL LEG
1) Press the FPL Key to display the active flight plan.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint within the
arrival.
4) Select the ACT LEG Softkey. A confirmation window showing the selected
leg will be displayed.
5) With ‘ACTIVATE’ highlighted, press the ENT Key.
LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’.
3) Press the ENT Key. A list of available approaches for the destination airport
is displayed.
4) Turn the either FMS Knob to highlight the desired approach.
The WAAS channel and ID for the selected approach procedure are
displayed in the ‘APPROACH CHANNEL’ field.
5) Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
6) Turn either FMS Knob to select the desired transition. The “Vectors”
option assumes vectors will be received to the final course segment of
the approach and will provide navigation guidance relative to the final
approach course.