User Guide

Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-00 Rev. B
25
Procedures
PROCEDURES
LOAD AND ACTIVATE A DEPARTURE PROCEDURE
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘SELECT DEPARTURE’.
3) Press the ENT Key. The cursor is displayed in the ‘DEPARTURE’ field with a
list of available departures.
4) Turn the large FMS Knob to highlight the desired departure.
5) Press the ENT Key. A list of runways may be displayed for the departure. If
so, turn either
FMS Knob to select the desired runway.
6) Press the ENT Key. The cursor is displayed in the ‘TRANSITION’ field with a
list of available transitions.
7) Turn the large FMS Knob to highlight the desired transition.
8) Press the ENT Key.
9) With ‘LOAD?’ highlighted, press the ENT Key. The departure will be active
when the flight plan is active.
ACTIVATE A DEPARTURE LEG
1) Press the FPL Key to display the active flight plan.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint within the
departure.
4) Select the ACT LEG Softkey. A confirmation window showing the selected
leg will be displayed.
5) With ‘ACTIVATE’ highlighted, press the ENT Key.
LOAD AN ARRIVAL PROCEDURE
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘SELECT ARRIVAL’.
3) Press the ENT Key. The cursor is displayed in the ‘ARRIVAL’ field with a list
of available arrivals.