User Guide

190-00600-00 Rev. B
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
24
Flight Planning
GRAPHICAL FLIGHT PLAN CREATION
1) Press the FPL Key to display the Active Flight Plan Page.
2) Press the Joystick to activate the map pointer. Use the Joystick to move the
pointer to the desired point on the map to be inserted as a waypoint in the
flight plan.
3) The default insertion point is at the end of the flight plan. If the selected
waypoint is to be placed anywhere other than the end of the flight plan, press
the
FMS Knob to activate the cursor. Waypoints are inserted ABOVE the cursor.
Turn the large
FMS Knob to select the desired insertion point.
4) Select the LD WPT Softkey. The selected waypoint will be inserted at the selected
point. The default user waypoint naming is USR000, USR001, USR002, and
so on.
5) To change the user waypoint name, follow the procedure for modifying a user
waypoint.