User Guide

190-00600-00 Rev. B
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
6
Nav/Com/XPDR/Audio Panel
ENTER A TRANSPONDER CODE
1) Press the XPDR Softkey to display the transponder mode selection softkeys.
2) Press the XPDR1 or XPDR2 Softkey to select the active transponder.
3) Press the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
4) Press the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.
SELECTING A COM RADIO
Transmit
Press the COM1 MIC or COM2 MIC Key on the audio panel.
Receive
Press the COM1 or COM2 Key on the audio panel.
SELECTING A NAV RADIO
1) Press the CDI Softkey to select NAV1 (VOR1/LOC1) or NAV2 (VOR2/LOC2).
2) Pressing the NAV1, NAV2, DME, or ADF Key selects and deselects the
navigation radio audio source. All radio keys can be selected individually or
together.
NAV/COM TUNING
1) Press the small tuning knob to select the desired radio for tuning.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.