User Guide

Garmin G1000 MFD Pilot’s Guide for the Beechcraft A36/G36190-00574-00 Rev. A
8-91
WAYPOINT PAGE GROUP
USER WAYPOINT INFORMATION PAGE
The G1000 allows the storage of up to 1,000 user-
defined waypoints. The User Waypoint Information
Page displays the waypoint name (up to six characters
long), identifier and radial from two reference waypoints,
distance from one reference waypoint, along with the user
waypoints latitude/longitude position.
Reference Waypoints
User Waypoint Name
General Location
User Waypoint Symbol
User Comment
User Waypoint List
User Waypoint Name
and Symbol
Latitude/Longitude
Figure 8.8.14 User WPT Information Page
Waypoint Statistics
The following data is displayed on the User Waypoint
Information Page:
• Map of surrounding area
• Identifier
• Comment
• General location
• Latitude/longitude
• A reference waypoint with identifier, radial, and
distance
• A second reference waypoint with identifier and
radial
• A list of all user waypoints
• Statistics of the number of user waypoint slots
used and available
To select the User Waypoint Information
Page:
1. From any page, press and hold the
CLR key to
select the Navigation Map Page.
2. Turn the
large FMS knob to select the ‘WPT’
page group. ‘WPT’ is displayed in the page
group icon located in the lower right corner
of the display.
3. Turn the
small FMS knob to select the User
Waypoint Information Page.
User Waypoint Information Page Operations
The following operations can be performed from the
User Waypoint Information Page:
• Creating user waypoints (by current location,
entered latitude/longitude position, reference
waypoint specifications, or map pointer location).
• Modifying user waypoint information (by com
-
ment, latitude/longitude position, or reference
waypoint information)
• Renaming user waypoints
• Deleting user waypoints