User Guide

Garmin G1000 AFCS Pilot’s Guide for Beechcraft A36/G36
190-00609-00 Rev. B
PROCEDURES
9-28
APPROACHES
ILS Approach
To fly an ILS Approach:
1. The pilot loads the Runway 29R ILS approach
for KFAT into the Flight Plan. The Pilot selects
‘Vectors to Final’ for the transition. Upon
being given vectors from ATC, the pilot sets
the Selected Heading and presses the
HDG key.
The Autopilot turns the aircraft to the desired
heading.
Figure 9.5.6 ILS Approach to KFAT
0
0
3
3
6
6
9
9
12
12
2
1
15
5
1
18
8
21
21
1
2
24
27
27
2
30
30
30
3
3
3
3
3
1.
2.
3
.
HDG Mode
GPS Cours
e
24
4
122
4.
5.
LOC/G
S
Mode
HILAN
KFAT
C
l
o
vi
s
V
O
RTA
C
(
CZQ
)
11
0
29
0
2
0
7
5
0
25
2. The pilot uses the Heading mode to comply
with ATC vectors, as requested.
3. In preparation for the approach and at the
pilot’s discretion, the pilot tunes the localizer
frequency, then selects the LOC mode on the
HSI.
4. When cleared for the approach, the pilot arms
the Approach mode by pressing the
APR key.
LOC and GS appear in the roll and pitch armed
field, respectively. The Autopilot and Flight
Director determine when to begin the turn to
intercept the final approach course.