Instruction Manual

Troubleshooting
Before you contact your Fusion dealer or service center, you should perform a few simple troubleshooting steps
to help diagnose the problem.
If the Fusion subwoofer has been installed by a professional installation company, you should contact the
company so the technicians can assess the problem and advise you about possible solutions.
There is no sound coming from the subwoofer
• Verify that all connections are connected correctly to the proper terminals.
The system lacks bass
• Verify that the subwoofer is attached firmly to the mounting surface.
The audio is distorted
• Verify that the panels surrounding the subwoofer on the vessel are not rattling.
• Verify that the amplifier is connected to the subwoofer terminals correctly.
• If the subwoofer is connected to an amplifier, verify that the input level of the amplifier is matched to the
output level of the stereo.
For more information, see the manual for the amplifier.
The LED lights will not turn on
• Verify that all wiring connections are correct and tight.
The LEDs pulse with the bass notes of the music
• Install a Fusion LED voltage regulator (SG-VREGLED).
7